Frequently Asked Questions

Some customers after installing the RM Young ws/wd sensor (p/n: SDI-WS-RMY-2) are reporting lower than expected wind speeds on their stations. Possible cause of this may be the sensor SDI card programmed for wind speed readings in meters per second instead of miles per hour. Go to the RESOURCES page and select TECH RESOURCES to find the procedure for Resetting the RM Young to MPH .

Go to the Resources page on this website, select Forms, and then select New Station PM and Parts/Sensor Data. Use this form to create a WFMI preventive maintenance schedule and a list of a parts/sensors that can be ordered through the RSFWSU Depot.

Select "Standards & Guidelines" on the navigation bar at the top of this website. Under "WFMI STATION EVENT REPORT" you can download a guide to the events commonly listed in the WFMI Station Event Report.

Access into WFMI can range from "view only" for the very basic user, to ordering parts or the ability to edit most of the station metadata. The type of access or "role" that an individual receives when applying for a WFMI account is typically agency specific. For most federal agencies you may need to contact your Regional Coordinator or National Program Coordinator to find out what type of access you need in WFMI. For state and private agencies contact the USFS National RAWS Program Manager. Contact information for most federal and state agencies can be found on this website under the "Contacts" tab.

Maintenance contracts with the Remote Sensing Fire Weather Support Unit (RSFWSU) do not cover the loss of station parts and sensors due to abuse, theft or vandalism. Customers can contact the RAWS Help Desk for information regarding supported manufacturers, suitable substitutes, and/or other options to replace RAWS components. NOTE: BLM customers should contact the RSFWSU for additional details regarding component replacement due to theft or vandalism.

The 555 Data Collection Platform has been a good, reliable piece of equipment. It's served us well for many years, and we actually have the spares and capabilities to support it for many more. However, peripheral hardware and software is technologically leaving the 555 behind. New laptops often lack a serial port, and/or have software and firmware issues that make communication with the 555 difficult to impossible. Adapter cables have become prohibitively expensive and impossible to source. New sensors are being developed or are in production that offer significant improvements, but they can't communicate through the 555 DCP. The Remote Sensing / Fire Weather Support depot does not expect to be able to keep BLM 555 DCPs supported beyond 2016. Depot customers who deal with the 555 may find it to be unsupportable much sooner. Local limitations involving suitable laptops, drivers, operating software, adapter cables, etc., will determine when any given depot customer can or cannot perform required programming with the 555, if and when they must do so. We recommend RAWS users coordinate with their agency RAWS program managers to plan for a suitable replacement for this equipment.

Depending on the model of computer and the method you are using to interface your programming cable the process of setting up your laptop could be somewhat complicated. Even at our RAWS training classes, when students have not taken the time to setup their laptops, most of the first day is spent just configuring computers. The best way to get your software loaded is to call the RAWS Help Desk so a technician can walk you through the setup process specific to your laptop.

Go to https://www.nifc.blm.gov/cgi/WfmiHome.cgi and select "Access Request". The form you will need is the "WFMI Weather - Maintenance User Access Request Form". Be sure to read the instructions for completing this form on page 2.

At this time our office is testing the Online 2000 application with Windows 7. The evaluation could take several weeks before we can determine if there are any concerns with the new operating system. Once we have done a thorough evalution we will post our findings in the News and Info section on the Home page of this website.

For Federal and most State agencies you can email the RSFWSU Depot supervisor Robbie Swofford to get a NESDIS id request form.